|
|
Back
Perfecting Your Smile
|
Dicoloured Teeth
|
|
Smile Confidently
|
|
Yellow and Discoloured Teeth
Tooth discolouration is when the enamel (the hard, outer surface of the tooth) or
the dentine (the layer below the enamel) becomes discoloured. Something as simple
as food and drink may cause stains to appear on the teeth. Sometimes however, discolouration
can indicate something more grave, such as exposure to substances that have harmed
the teeth.
The appearance of the dentition is of concern to a large number of people seeking
dental treatment and the colour of the teeth is of particular cosmetic importance.
There has been a recent increase in interest in the treatment of tooth staining
and discolouration as shown by the large number of tooth whitening agents appearing
in the market. Some of these agents are sold as 'over-the-counter' products and
have no professional involvement in their application. The correct diagnosis for
the cause of discolouration is important as, invariably, it has a profound effect
on treatment outcomes.
The coronal portion of the tooth consists of enamel, dentine and pulp. Any change
to these structures is likely to cause an alteration in the outward appearance of
the tooth caused by its light transmitting and reflecting properties. Tooth discolouration
has been classified according to the location of the stain, which may be either
intrinsic or extrinsic.
Intrinsic discolouration
Intrinsic discolouration occurs following a change to the structural composition
or thickness of the dental hard tissues. The normal colour of teeth is determined
by the blue, green and pink tints of the enamel and is reinforced by the yellow
to brown shades of dentine beneath. A number of metabolic diseases and systemic
factors are known to affect the developing dentition and cause discolouration as
a consequence. Local factors such as injury are also recognised.
- Alkaptonuria
- Congenital erythropoietic porphyria
- Congenital hyperbilirubinaemia
- Amelogenesis imperfecta
- Dentinogenesis imperfecta
- Tetracycline staining
- Fluorosis
- Enamel hypoplasia
- Pulpal haemorrhagic products
- Root resorption
- Ageing
Extrinsic discolouration
Extrinsic discolouration is outside the tooth substance and lies on the tooth surface
or in the acquired pellicle. The origin of the stain may be:
Internalised discolouration
Internalised discolouration is the incorporation of extrinsic stain within the tooth
substance following dental development. It occurs in enamel defects and in the porous
surface of exposed dentine. The routes by which pigments may become internalised
are:
- Developmental defects
- Acquired defects
- Tooth wear and gingival recession
- Dental caries
- Restorative materials.
Depending upon the degree of staining the treatment modalities vary.
Treatment of Superficial Enamel Discolouration
|
|
Tooth bleaching |
Tooth bleaching can be the first step for treating certain kinds of dental staining
problems. It is usually reserved for a mild, uniform, discolouration of the teeth.
The bleach oxidizes the organic pigments in the tooth, breaking down the long- chain
stain molecules.
|
TREATMENT |
ACTIVE AGENT |
INDICATIONS FOR USE |
POTENTIAL PROBLEMS |
|
In-Office Vital Bleaching |
Hydrogen peroxide 30-38% is applied directly on the teeth. A special light may also
be used to accelerate the whitening process. |
When there are only a few discoloured teeth. |
Temporary tooth sensitivity and gingival irritation. |
|
Overnight Vital Bleaching at home |
Carbamide peroxide 10% is used in a custom tray. |
When there are multiple discolored teeth. Effective for yellow, orange or light-
brown discolouration in primary and permanent teeth. |
Temporary tooth sensitivity in 55-75% of cases. |
|
Whitening Strips for use at home |
Hydrogen peroxide 6.5% or 14% is delivered via a thin, flexible polyethylene strip. |
Multiple discoloured teeth. Works slightly better on upper than lower teeth. |
Temporary tooth sensitivity and oral tissue irritation. |
|
|
Treatment of Deep Enamel Discolouration |
|
Deep internal dental stains are due to pulpal trauma, fluorosis, hypocalcification,
tetracycline, hereditary opalescent dentin or mottled enamel and require more complex
treatment. |
|
TREATMENT |
ACTIVE AGENT |
INDICATIONS FOR USE |
POTENTIAL PROBLEMS |
|
Etch, Bleach, and Seal technique |
Phosphoric acid 37%, sodium hypochlorite 5%, and clear sealant. |
Shallow yellow- brown enamel discolourations. |
Does not remove stains which are deeper than a few tenths of a millimetre |
|
Microabrasion with Dental Bleaching |
Abrasive slurry consisting of silicon carbide and hydrochloric acid 11%. |
May not be able to remove the stain completely. |
Temporary tooth sensitivity and oral tissue irritation. |
|
Composite Veneers and laminates |
Dental composite. |
Deep tetracycline stains. |
A layer of enamel must first be removed from the surface of the tooth. |
|
|
Handy tips and remedies
- Avoid excessive fluoride use. You may want to find out the fluoride level in your
local water supply. Fluorine intake is important for our body, however too much
can cause tooth discolouration.
- Do not take drugs belonging to the tetracycline
family if you are pregnant and do not give it to children who are under eight years
of age.
- Ensure that children are aware of the importance of dental hygiene.
They should brush their teeth twice a day and this should be supervised to ensure
that they are doing it properly. Most children need help with brushing until they
are around seven.
- Visit your dentist. One cannot treat or cure discolouration on their own sitting
at home. Only thing that can be done is prevention.
|
|
Back
|
|
Jutted & Crooked Teeth
|
|
There are a number of factors associated with the development of crooked teeth e.g.
eruption pattern of permanent teeth, presence of other teeth and the oral structures
influencing the position of the teeth. Other common factor can be tooth loss due
to dental caries which was failed to be replaced, causing drifting and movement
of neighbouring teeth.
Crooked teeth hamper good oral hygiene practices. In addition, it affects a person’s
personality on a physical, social and mental basis. If your crooked teeth cause
you to smile a tight-lipped smile, consider one of the following options.
Orthodontic Treatment
-
Braces
Braces work by putting pressure on your teeth to shift them into a more attractive
position. Often, braces come in the form of metal, plastic or ceramic brackets glued
to the front of the teeth. These brackets hold a tightening wire in place. The wire
is in the shape your orthodontist wants to see your teeth. Once threaded through
the brackets, this wire tries to get shift into shape and moves your teeth along
with it. These wires are tightened once a month for a period of up to two and a
half years, depending on the severity of your condition. Of these three types of
braces, ceramic brackets are the least noticeable, as their translucent colour allows
them to blend in with the natural teeth colour. -
Lingual Orthodontics
Lingual braces are a similar and less visible option—the brackets are glued to the
lingual or tongue side of your teeth. Once the braces come off, you will likely
have to wear a retainer for a few months to keep your teeth from shifting. This
advanced method makes lingual orthodontics particularly well-suited for adults,
who often want to improve the look and function of their teeth without letting anyone
else know about their treatment. -
Invisalign
A newer option is Invisalign, a series of plastic, transparent, removable aligners
that squeeze the teeth tightly into place. Like braces, invisalign shifts your teeth
into a straighter position.
The most obvious advantage of the treatment is cosmetic. The aligners are completely
transparent, therefore far more difficult to detect than traditional wire and bracket
braces. The invisalign system also boasts improved hygiene over traditional braces.
Because the clear retainers are removable, patients can brush and floss as they
normally would, reducing the chances of possible staining and decay that often occur
with traditional braces. But, all good things come with a disadvantage. The disadvantages
of invisalign include the high cost of the aligners and the difficulty in treating
more complex cases.
-
Accelerated Orthodontics
If you want fast results and can stand a little pain, ask your dentist about accelerated
orthodontics. A team of dental specialists will perform a combination of orthodontic
and periodontic work to get you the smile you want—fast. The process takes about
six months, a quarter of the time it takes for traditional orthodontics. Most often,
this form of orthodontics requires you to wear lingual braces. Note that some dental
insurance policies will not cover the cost of this procedure.
Cosmetic Dentistry
|
|
Back
|
|
Missing Teeth
|
|
As age advances, some of us will lose teeth due to disease, injury, or simple daily
wear. In addition to bringing about unwanted changes to a person's facial appearance,
missing teeth have a negative effect on that person’s confidence and self- esteem.
Patients can choose from a variety of options to replace missing teeth. There are
removable partial dentures held in place by wire clips; fixed dental bridges cemented
into position by crowns placed on the teeth adjacent to an empty space; traditional
full dentures and the implants.
Removable Partial Dentures
The removable partial denture is a prosthesis that is designed and fabricated to
be removed by the patient.
All definitive RPDs will have the following components:
- major connector
- minor connectors
- direct retainers
- indirect
retainers
- denture bases
- prosthetic teeth
There are several types of RPD's. All of them use standard acrylic denture teeth
as replacements for the missing natural teeth. The differences between them are
the materials that are used to support the denture teeth and retain the RPD in the
mouth.
Conventional RPD’s
RPD’s are made from acrylic denture base.
-
Cast Metal RPD's
Removable Partial Dentures with cast metal frameworks are probably one of the oldest
forms of dentistry. This type of partial denture offers numerous advantages. Since
they sit on the teeth, as well as being attached to them, they are extremely stable
and retentive. The teeth have been altered slightly beforehand in order that the
partial denture can rest upon them without interfering with the way the patient
bites the teeth together.
The metal framework does not contact the gums. Thus, as the gums resorb, this type
of partial does not sink with them and rarely requires relines. Because the teeth
are altered, there are fewer limitations in the placement of clasps and they are
less likely to be seen than the wrought wire clasps of the treatment. Modern frameworks
are cast from an extremely strong alloy called chrome cobalt which can be cast very
thin and are much less likely to break than the all plastic variety. They are also
much less noticeable to the tongue.
The largest single advantage that cast metal framework partial dentures have over
the newer flexible framework partials is that sore spots are almost never an issue
since neither the framework nor the plastic extensions contact the soft oral tissues
with any force.
-
The Flexible Framework RPD's
Valplast
The most recent advance in dental materials has been the application of nylon- like
materials to the fabrication of dental appliances. This material (the most common
name brand is ValPlast) generally replaces the metal and the pink acrylic denture
material used to build the framework for standard removable partial dentures. It
is nearly unbreakable, is colored pink like the gums, can be built quite thin and
can form not only the denture base, but the clasps as well. Since the clasps are
built to curl around the necks of the teeth, they are practically indistinguishable
from the gums that normally surround the teeth.
Flexite
A second type of nylon partial denture base is a brand called Flexite. This polymer
is also flexible and is built with tooth colored clasps, but unlike Valplast, it
is much easier for the dentist to adjust making it a much more "user friendly" denture
base. This type of partial denture is extremely stable, retentive and the elasticity
of the flexible plastic clasps keeps them that way indefinitely.
Fixed Partial Denture / Dental Bridges
A bridge, by definition, is a link or connection between two permanent structures.
A dental bridge is very similar in that it attaches the restorative teeth (bridge)
to the natural teeth on either side of the gap.
Dental bridges are false teeth, which are anchored onto neighbouring teeth in order
to replace one or more missing teeth. The false tooth is known as a pontic and is
fused in between two crowns that serve as anchors by attaching to the teeth on each
side of the false tooth, thereby bridging them together. The two crowns that are
attached to healthy, adjacent teeth are called abutment teeth.
A fixed bridge is designed to remain in the mouth and cannot be removed and replaced
like removable dentures. A fixed dental bridge may be used to replace just one tooth
or several teeth.
There are three main types of dental bridges
Complete Dentures
A complete denture replaces all the natural teeth and associated structures in both
the maxilla and mandible. The complete denture is fabricated using maxillo- mandibular
relation in function and non- function.
Parts of the Denture
- Denture Base.
- Denture Flange.
- Denture Border.
- Denture Teeth.
The upper denture covers the whole palate, making an air-tight zone. Usually
with the complete upper dentures we can get a pretty good suction and retention
due to the large surface area of the denture base.
The full lower denture is the one where most of the people have tremendous
problems. The anatomy of the lower jaw does not allow us to get a good suction of
the denture. The fact that the lower jaw is the mobile bone (we move it constantly
speaking, eating, swallowing) and because there is not much of the attached gum
on the bottom, it makes it almost impossible to get good retention on the lower
jaw.
Implants
Dental implants are sturdy titanium posts that are anchored directly into the jawbone
and topped with realistic replacement teeth which provide the security and usability
of permanently placed teeth.
Dental implants are a restorative dentistry option that allows patients to replace
missing teeth with ones that look, feel and perform like their own. During the first
step of this procedure, a doctor skilled in implant dentistry surgically places
a titanium screw or post in the patient's jaw. After the gums have healed around
the embedded post, a replacement tooth is attached to the top of it.
An implant restoration is made up of 3 main parts:
- Implant Posts: An implant post is a titanium "screw" surgically inserted
into the bone of the jaw that act as a replacement root for the missing tooth. Implant
posts are normally threaded on its external surface and the internal aspect of the
implant is usually a hollow well with screw threads. Titanium is chosen for this
purpose because titanium is inert, biocompatible and integrates with the surrounding
jaw bone with minimal risk of infection.
- Abutment: An abutment acts as
the "stump" that holds the crown or false tooth that is screwed into the implant
posts.
Crown: The crown is the visible false tooth of the implant restoration. Crowns
on implants resembles a crown on natural tooth in almost every way. Crowns on implants
can be porcelain fused to metal crowns or full ceramic crowns.
|
|
Back
|
|
Gummy Smile
|
|
A gummy smile is a smile showing an excessive amount of gingival (gum) tissue above
the front teeth when smiling. Large gums or short teeth can give your mouth an imbalanced
"gummy" look. Fortunately, various treatment options are available depending on
the cause for gumminess.
A number of factors can lead to gummy smile:
- Inadequate normal gum recession or altered passive eruption: As the teeth erupt
(grow out of the gums), the gums recede upwards—most of the time. In some cases,
the gums remain and cover part of the teeth, making normal- sized teeth look short.
-
Irritation from braces: At the time of orthodontic treatment, the gums can become
irritated by the braces and overgrow.
- Mouth Breathing: Nasal or adenoid problems
can lead a patient to breathe through the mouth, especially at night. This habit
dries out the gum tissue, leaving it susceptible to disease and overgrowth.
-
Medication: Medicine such as Dilantin and Cyclosporine can lead to gum tissue overgrowth.
-
High Lip Lines: The shape of the patient's mouth can sometimes bare more of the
gum tissue than is visible in the average person's mouth.
Gummy smiles can also be caused by attrition, a condition where the teeth have been
severely worn down. This case is one where the teeth seriously are too short. Bad
habits such as night-time teeth grinding can cause this wear.
Different options available for reducing a gummy smile are:
|
|
Top
|
|
|
|
|
|