|
Tooth loss is common with age, bringing unwanted changes to a person's facial appearance,
confidence and self- esteem. Patients can choose from a variety of options to replace
the missing teeth. There are removable partial dentures held in place by wire clips,
fixed dental bridges cemented into position by crowns placed on the teeth adjacent
to an empty space, traditional full dentures and the implants.
Importance of replacement
After a tooth is lost space is created in the mouth. Due to the functional loading
of the teeth adjacent to the site of missing tooth, the adjoining teeth tends to
move and occupy the vacant space. Thus the teeth functioning get disorganised. The
stress also weakens the supporting bones and gums. It may also lead to deteriorating
changes in the joint. All this can be avoided with tooth replacement. A substitute
to the natural tooth which functions on similar lines.
|
|
Removable Partial Dentures (RPD)
The removable partial denture is a prosthesis that is designed and fabricated to
be removed by the patient. All definitive RPDs will have the following components
major connector, minor connectors, direct retainers, indirect retainers, denture
bases and prosthetic teeth. There are several types of RPD's. All of them use standard
plastic denture teeth as replacements for the missing natural teeth. Conventional
RPD’s are made from acrylic denture base.
Cast Metal RPD's : Removable Partial Dentures with cast metal frameworks
are probably one of the oldest forms. This type of partial denture offers numerous
advantages since they sit on the teeth, as well as is attached to them, they are
extremely stable and retentive. The teeth are altered slightly before-hand in order
that the partial denture can rest upon them without interfering with the way the
patient bites. The metal framework does not contact the gums. This type of partial
does not sink with them and rarely requires relines. Because the teeth are altered,
there are fewer limitations in the placement of clasps and they are less likely
to be seen than the wrought wire clasps of the treatment.
Modern frameworks are cast from an extremely strong alloy called chrome cobalt which
can be cast very thin and are much less likely to break than the all plastic variety.
They are also much less noticeable to the tongue. The largest single advantage that
cast metal framework partial dentures have over the newer flexible framework partials
is that sore spots are almost never an issue since neither the framework, nor the
plastic extensions contact the soft oral tissues with any force.
Valplast : The most recent advance in dental materials has been the application
of nylon-like materials to the fabrication of dental appliances. This material (the
most common name brand is ValPlast) generally replaces the metal and the pink acrylic
denture material used to build the framework for standard removable partial dentures.
ValPlast is similar to the material used to build those fluorescent orange traffic
cones you sometimes see on highways. It is nearly unbreakable, coloured pink like
the gums, can be built quite thin and can form not only the denture base, but the
clasps as well. Since the clasps are built to curl around the necks of the teeth,
they are practically indistinguishable from the gums that normally surround the
teeth.
Flexite : A second type of nylon partial denture base is a brand called Flexite.
This polymer is also flexible and is built with tooth coloured clasps, but unlike
Valplast, it is much easier for the dentist to adjust making it a much more "user
friendly" denture base. This type of partial denture is extremely stable, retentive
and they remain that way due to the elasticity of the flexible plastic clasps.
|
|
Fixed Partial Denture / Dental Bridges
A bridge, by definition, is a link or connection between two permanent structures.
A dental bridge is very similar in that it attaches the restorative teeth (bridge)
to the natural teeth on either side of the gap.
Dental bridges are false teeth, which are anchored onto neighbouring teeth in order
to replace one or more missing teeth. The false tooth is known as a pontic and is
fused in between two crowns that serve as anchors by attaching to the teeth on each
side of the false tooth, thereby bridging them together. The two crowns that are
attached to healthy, adjacent teeth are called abutment teeth A fixed bridge is
designed to remain in the mouth and cannot be removed and replaced like removable
dentures. A fixed dental bridge may be used to replace just one tooth or several.
There are three main types of dental bridges
- Traditional fixed bridge: This is the most commonly used type of bridge and
consists of a pontic fused between two porcelain crowns that are anchored on neighbouring
teeth. The pontic is usually made of either porcelain fused to metal or ceramics.
This procedure is used to replace one or more missing teeth. These are fixed and
cannot be removed.
- Resin-bonded bridges or Maryland-bonded bridges: These are chosen when the
gap to be filled is in between the front teeth, or when the teeth on either side
of the missing tooth are strong and healthy without large fillings. The false tooth
is fused to metal bands that are bonded to the abutment teeth with a resin which
is hidden from view. This type of bridge reduces the amount of preparation on the
adjacent teeth.
- Cantilever bridges: Cantilever bridges are used in areas such as the front
teeth that are under less stress. They are used when there are teeth present on
only one side of the space, where the false tooth is anchored to one or more adjacent
teeth on one side.
Bridges may be made of porcelain, porcelain bonded to precious metal and all-metal
dental bridges (gold).
|
|
Complete Dentures
A complete denture replaces all the natural teeth and associated structures in both
the maxilla and mandible. The complete denture is fabricated using maxillo-mandibular
relation in function and non function. Parts of the denture are denture base, denture
flange, denture border and denture teeth.
The upper denture covers the whole palate, making an air-tight zone. Usually
with the complete upper dentures we can get a pretty good suction and retention
due to the large surface area of the denture base. The full lower denture
is the one where most of the people have tremendous problems. The anatomy of the
lower jaw does not allow us to get a good suction of the denture. The fact that
the lower jaw is the mobile bone (we move it constantly speaking, eating, swallowing)
and because there is not much of the attached gum on the bottom, it makes it almost
impossible to get good retention on the lower jaw.
Fixed dentures
It is the sturdiest tooth option. For the procedure the adjacent two teeth too are
prepared for crowns and a false tooth is attached between these two crowns to replace
the missing tooth. It provides stability and facilitates the functioning of the
oral cavity.
Implants
Dental implants are a restorative dentistry option that allows patients to replace
missing teeth with ones that look, feel, and perform like their own. Dental implants
are sturdy titanium posts, anchored directly into the jawbone and topped with realistic
replacement teeth, provide the security and stability of permanently placed teeth.
During the first step of this procedure, a doctor skilled in implant dentistry surgically
places a titanium screw or post in the patient's jaw. After the gums have healed
around the embedded post, a replacement tooth is attached to the top of it.
An implant restoration is made up of 3 main parts:
- Implant Posts: An implant post is a titanium "screw" surgically inserted
into the bone of the jaw that act as a replacement root for the missing tooth. Implant
posts are normally threaded on its external surface and the internal aspect of the
implant is usually a hollow well with screw threads. Titanium is chosen for this
purpose because titanium is inert, biocompatible and integrates with the surrounding
jaw bone with minimal risk of infection.
- Abutment: An abutment acts as the "stump" that holds the crown or false tooth
that is screwed into the implant posts.
- Crown: The crown is the visible false tooth of the implant restoration. Crowns
on implants resembles a crown on natural tooth in almost every way. Crowns on implants
can be porcelain fused to metal crowns or full ceramic crowns.
NOTE:
- Dental implants are placed in adults who are good or moderate in health.
- Certain uncontrolled medical conditions decrease the effectiveness of implant treatment.
FAQs
Q: Is the implant placement painful?
A:No, as it is usually done under local anaesthsia.
Q: How much pain will I feel after implant placement?
A:There will be minor discomfort. Above all your dentist will prescribe appropriate
medication to alleviate the pain.
Q:How long does it take to place dental implants?
A:Usually 30-60 minutes, depending upon the location of dental implant and
their number.
Q:What can I eat after having an implant placed?
A:A diet which you can follow for the next few days will be outlined for
you . It will mainly include soft foods.
Q:How long does placement, healing of the replacement teeth take?
A:The entire process usually take about 3 to 9 month, depending upon your
treatment plan.
Q:How do I care for my implant?
A:Home care for implants would include proper brushing and flossing. Regular
visits would also be required for long term success.
Q: How long does an implant last?
A:If your body accepts the implant, it should last many years under proper
care. Many implants are known to last for more than 40 years.
Q:If my body rejects an implant, what happens?
A:The implant is removed and the site is allowed to heal. Another implant
can usually be placed after healing.
|